Introduction:
JIC Fitting is a range of hydraulic fittings that’s made in accordance to the SAE J514 standards. The acronym JIC stands for Joint Industry Council. It’s also known as the JIC thirty seven degrees flare fitting since it has a thirty seven degrees flare seating surface. These fittings are utilized on oil hydraulic methods in fields which are many (gas delivery, etc…), mobile hydraulic equipment, shipbuilding, fuel power application. A JIC fitting device has three components that make a tubing assembly: installing, flare nut, and sleeve.
Material:
Materials used to fabricate JIC fittings include carbon steel and stainless-steel SS316L.
Sizes:
JIC body and flare nut are obtainable in exterior diameter (“OD) sizes between 1/8″ to one 2”. Sleeve has two different reading measurements, metric size (mm) & inch exterior diameter (“OD). Sleeve size is available from 3mm to 50mm and 1/8″ to 2”. Fitting sizes are designated by the corresponding outside diameter of the tubing for the numerous kinds of tube ends.
Functioning Pressure:
The conventional functioning pressure of the fittings ranges from thousand to 5000 psi for various sizes & contacts. The minimum burst stress is 4 times the working strain. The JIC fittings have to be in a position to withstand twice the working strain for a period of 1 minute without leakage or failure.
Remember to take note that the pressure rating of an exact same fitting may vary when it’s connected to different equipments.. For instance, if a fitting with a minimal working pressure is connected to a pipe, it is going to result in an overall even lower working pressure. In all cases, constantly consider the lowest pressure as the optimum working pressure of the product.
Just how does a JIC fitting works: For tube connections, the assembly treatment begins out of the preparation of the tube. For starters, the nut as well as sleeve are inserted onto the conclusion of a hose. With all the use of a flaring tool, create the conclusion of the conduit to 37 degrees. Next, firm up the nut by making use of a spanner till the nut is firm and also the sleeve grips upon the tube. If the fittings are bench assembled, the gripping action can be determined by revolving the tubing manually as the nut is pulled down. When the hose might no longer be turned by hand, the sleeve has gripped onto the tube. If this happens,, firm up the nut by switching it one complete turn. This may vary slightly with different tubing materials, but for general practice, alpilean diet – no title – it is a very good rule to adhere to.
Configurations of JIC Fitting: Commonly used connection types comprise of: JIC/BSPP Male Connector, JIC/ NPT Male connector, JIC union, JIC/NPT Swivel Male Connector, JIC/BSPP Swivel Male Connector.
Brand of JIC Fittings:
HS Corporation is a Korean supplier specializing in JIC Fitting. Established in 1980, HS Corporation has more than 30 years of specialized expertise in producing fittings.